Format notes

From specialfunctionswiki
Revision as of 04:48, 26 November 2016 by Tom (talk | contribs) (Categories)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is a list of common code templates and styles we use at specialfunctionswiki.

Defining a new function

Try to follow roughly the following as much as possible:

The such-and-such function $\mathrm{mathname} \colon domain \rightarrow codomain$ is defined by
$$\mathrm{mathname}(x) = 2 \displaystyle\int_a^x t\mathrm{blabla}(t) \mathrm{d}t,$$
where $\mathrm{blabla}$ is the [[blabla]] function.

which generates:
The such-and-such function $\mathrm{mathname} \colon domain \rightarrow codomain$ is defined by $$\mathrm{mathname}(x) = 2 \displaystyle\int_a^x t\mathrm{blabla}(t) \mathrm{d}t,$$ where $\mathrm{blabla}$ is the blabla function.

Theorem/proof box template

New way

Each theorem should have its own page. Each theorem page should be formatted in the following way:

__NOTOC__

==Theorem==
statement of theorem

==Proof==
proof of theorem █ 

==References==
references to this fact in the literature

[[Category:Theorem]]

Old way

The following code that appears in many places should be phased out in favor of the above.

The code

<div class="toccolours mw-collapsible mw-collapsed">
<strong>Theorem:</strong> STATEMENT OF THEOREM
<div class="mw-collapsible-content">
<strong>Proof:</strong> proof goes here █ 
</div>
</div>

creates

Theorem: STATEMENT OF THEOREM

Proof: proof goes here █

Images

Galleries

Put images into galleries. Thumbnails and frames break the theorem/proof box template. The code

<div align="center">
<gallery>
File:Arccos.png|Graph of $\mathrm{arccos}$ on $[-1,1]$.
File:Complex arccos.jpg|[[Domain coloring]] of [[analytic continuation]].
</gallery>
</div>

creates

Domain colorings

In Ubuntu... modify the cplot function in

/usr/lib/python2.7/dist-packages/mpmath/visualization.py

by commenting out the if statement at the end as follows:

    #if fig:
    #    if file:
    #        pylab.savefig(file, dpi=dpi)
    #    else:
    #        pylab.show()

This will allow us to call the savefig function ourselves as we do below. You may also alter the savefig command in visualization.py to have the correct parameters, but in most domain colorings we won't assume this.

With Python (best way)

We modify the code

#!/usr/bin/python
import numpy as np
import matplotlib.pyplot as plt
from mpmath import *

cplot(lambda sin(x): f(x),[-10,10],[-10,10],points=50000,verbose=True)
plt.savefig('complexsinedomaincoloring.png',bbox_inches='tight',pad_inches=0.0)

to generate domain colorings.

With Mathematica (old way)

We use the code

ComplexGraph[f_, {xmin_, xmax_}, {ymin_, ymax_}, 
  opts : OptionsPattern[]] := 
 RegionPlot[True, {x, xmin, xmax}, {y, ymin, ymax}, opts, 
  PlotPoints -> 200, ColorFunctionScaling -> False, 
  ColorFunction -> 
   Function[{x, y}, 
    With[{ff = f[x + I y]}, 
     ColorConvert[
      Hue[(2. Pi)^-1 Mod[Arg[ff], 2 Pi], 1, 
       1 - (1.2 + 10 Log[Abs[ff] + 1])^-1], "LAB"]]]]

to generate complex domain colorings. This coloring applied to the identity function $f(z)=z$ with the Mathematica code

 f[z_]:=z
ComplexGraph[f,{-10,10},{-10,10}]

Glyphs

When uploading a glyph (whether a plot in the plane or a domain coloring or a 3d graph), put
[[Category:functionnameglyph]]
in the description.

With Python (best way)

We use mpmath with the file visualization.py (in Debian, it is located at /usr/lib/python2.7/dist-packages/mpmath/visualization.py) altered in the following way: comment the two following lines

axes.set_xlabel('Re(z)')
axes.set_ylabel('Im(z)')

and add the following line

axes.set_axis_off()

Doing this will get rid of the left and right matter when using cplot. After this, use an image editing program (such as gimp) to cut out a square in the colored region. Upload this raw square with a filename like "complexsineglyph.png" (use prefix complex for domain colorings, without that prefix it should refer to a normal plot-type glyph) and upload that file.

$y=f(x)$-type graphs

#!/usr/bin/python
import numpy as np
import matplotlib.pyplot as plt
from mpmath import *
from pylab import rcParams
rcParams['figure.figsize'] = 2.4,2.4

x=np.arange(0,2*pi,0.00001)
f=np.vectorize(sin)
y=f(x)

fig, ax = plt.subplots()
plt.ylim([-1.1,1.1])
#ax.spines['left'].set_position('center')
ax.spines['right'].set_color('none')
ax.spines['bottom'].set_position('center')
ax.spines['top'].set_color('none')
ax.spines['left'].set_smart_bounds(True)
ax.spines['bottom'].set_smart_bounds(True)
ax.xaxis.set_ticks_position('none')
plt.tick_params(axis='x', which='both', bottom='off', top='off', labelbottom='off')
plt.tick_params(axis='y', which='both', left='off', right='off', labelleft='off')

plt.plot(x,y,linewidth=5,color='Black')

plt.savefig('sineglyph.png',bbox_inches='tight',pad_inches=0.0)

generates Sineglyph.png
which we upload to the Wiki with name sineglyph.png. The file we get is Sineglyph.png -- notice we have added the category

[[Category:sineglyph]]

This is so that we can use the randomimagebycategory extension.

Domain colorings

We use mpmath with the file visualization.py altered in the following way: comment the two following lines

axes.set_xlabel('Re(z)')
axes.set_ylabel('Im(z)')

and add the following line

axes.set_axis_off()

Doing this will get rid of the left and right matter when using cplot. After this, use an image editing program (such as gimp) to cut out a square in the colored region. Upload this raw square with a filename like "complexsineglyph.png" (use prefix complex for domain colorings, without that prefix it should refer to a normal plot-type glyph) and upload that file.

With Mathematica (old way)

We use the Mathematica code

Plot[AiryAi[x], {x, -12, 3}, PlotStyle -> {Thickness[0.04], Black}, AxesStyle -> Thickness[0.01], Ticks -> None]

to output the image
Airyaithumb.png
which we upload to the Wiki with name Airyaithumb.png use a thumbnail in an HTML table cell with the code

<td><center>[[File:Airyaithumb.png|45px|link=Airy Ai]]<br />
[[Airy Ai]]</center></td>

to display it.

Extensions

RandomImageByCategory

We use a modified version of RandomImageByCategory: inside RandomImageByCategory.php, replace the line

$thumbnail = "<a href=\"" . htmlspecialchars( $image_title->getFullURL() ) . "\">{$thumb_image->toHtml()}</a>";

with

$thumbnail = "{$thumb_image->toHtml()}";

This prevents RandomImageByCategory from forcing the generated image to link to the image itself and allows you make a randomly generated image link to another page using the following code:

[[Sine|<randomimagebycategory categories="Sineglyph" width="45" />]]

generates the randomly chosen image from the category Category:Sineglyph:

Categories

When uploading a traditional $x$-axis $y$-axis plot, use
[[Category:Plot]]

When uploading a domain coloring, use

[[Category:DomainColoring]]

For any page for a specific special function, use

[[Category:SpecialFunction]]

When making a new theorem, use

[[Category:Theorem]]

If a theorem is proven, use

[[Category:Proven]]

If a theorem is not proven, use

[[Category:Unproven]]

If a theorem's proof requires more justification to be technically rigorous, then add the following category in addition to "Category:Theorem":

[[Category:Justify]]

Python LaTeX

Whenever we use Python to generate an image that contains LaTeX code, we have configured matplotlibrc with the following:

text.usetex : True

and

text.latex.preamble : \usepackage{amsmath}